CM130 Micro - full reset / pairing process

1. Remove the battery cover from the back of the Transmitter
2. Insert 2xAA batteries into the battery compartment ensuring that the batteries are the correct orientation.
3. Press the reset button in the Transmitter battery compartment.
4. Remove the battery cover from the base of the Display
5. Press and insert 2xAA batteries into the battery compartment ensuring that the batteries are the correct orientation.
6. Press and hold the Check key in the Transmitter battery compartment until the Red light starts to flash slowly.
7. Press the reset button on the back of the Display. (the end of a paperclip would be suitable)
8. A zero should appear in the display as soon as the units have paired.
9. Replace the battery cover of the Display
10. Replace the battery cover of the Transmitter