The Alarm function allows you to set a usage figure based on energy use at which an alarm will be given.
When your electricity usage indicates a cost figure above the Alarm figure you have input, the unit will emit a tone 3 times, and then flash the large figures on the screen until the MODE key is pressed.
To SET ALARM
Press SET key until CLOCK is displayed.
Press MODE key repeatedly until ALARM is displayed
Press SET key Press Mode key until ON is displayed
Press SET key
Use MODE and ADJUST keys to set the ALARM LEVEL desired
Press SET key after each digit of the ALARM LEVEL is correctly set
CURR will be displayed
PRESS MODE key repeatedly until END is displayed